Get outside and enjoy your lawn with Scotts® Turf Builder® Rapid Grass Bermudagrass. With our revolutionary mix of grass seed and fertilizer in one effective formula, your lawn benefits from extended feeding, resulting in full, green grass. Compared to seed alone, your lawn will grow 2X faster (when applied at the new lawn rate, subject to proper care). You can count on Scotts® Turf Builder® Rapid Grass Bermudagrass to grow full, green grass in tough conditions (subject to proper care). Use on either new lawns or overseeding existing grass. For best results, apply in the spring or early summer when air temperatures are consistently between 70°F and 90°F. We recommend using a Scotts® spreader to apply this product (please refer to spreader settings on product label). Do not use weed control products until your lawn has been mowed at least 4 times. Finally, be sure to apply Scotts® Lawn Food products every 8 weeks throughout the season to help maintain your thick, green lawn. One 4 lb. bag of Scotts® Turf Builder® Rapid Grass Bermudagrass has a new lawn coverage of 1,498 sq. ft. and an overseeding coverage of 5,000 sq. ft.

How to Use

When Seeding a New Lawn

• One 4 lb. bag covers 1,495 sq. ft. of a new lawn.
• Rake the area you will be seeding to loosen the top layer of soil (roughly 2" deep). Remove any dead grass or debris to ensure seed-to-soil contact.
• Apply using a Scotts® spreader - Set a Scotts® Hand-Held Spreader to 4. Set a Scotts® Broadcast/Rotary Spreader to 3 3/4. Set a Scotts® Drop Spreader to 10 1/2. Set a Scotts® Wizz® Spreader to 4. Set a Scotts® Elite Spreader to 4.
• After applying, lightly rake the product into the soil. Ensure it is covered just beneath the soil surface.
• Water daily to keep the soil surface moist until the seedlings reach at least 2 in. tall.

When Overseeding an Existing Lawn

• One 4 lb. bag covers 5,000 sq. ft. when overseeding an existing lawn.
• Mow the area to a height of approximately 2 in. or mow at the lowest mower setting. Rake the area you will be seeding to loosen the top layer of soil. Remove any dead grass or debris to ensure seed-to-soil contact.
• Apply using a Scotts® spreader - Set a Scotts® Hand-Held Spreader to 2. Set a Scotts® Broadcast/Rotary Spreader to 2. Set a Scotts® Drop Spreader to 6 3/4. Set a Scotts® Wizz® Spreader to 3. Set a Scotts® Elite Spreader to 3.
• Water daily to keep the soil surface moist until the seedlings reach at least 2 in. tall.
• You can start to mow again when the lawn reaches the desired mowing height.

Where Not to Use

• Do not apply near water, storm drains or drainage ditches.

Where to Use

• Developed for use on lawns in the Southern United States.

When to Apply

• For use in the spring or fall when soil temperatures are consistently between 65°F and 80°F, or air temperatures are between 70°F and 90°F

Watering Tips

• For best results, water twice daily for at least 3 weeks.

Using with Other Products

• Please refer to package direction when applying Scotts Fertilizer products before or after seeding.

Store out of reach of children.

Apply this product only to your lawn. Sweep any product that lands on the driveway, sidewalk, or street back onto your lawn.

Start to mow when new grass reaches 2-3 inches in height.

You can start to enjoy a full, green lawn in 21-28 days as Scotts® Turf Builder® Rapid Grass™ Bermudagrass grows 2x faster than seed alone (when applied at the new lawn rate).

For best results, always use fresh products.