Get outside and enjoy your lawn with Scotts® Turf Builder® Rapid Grass™ Bermudagrass. This combination grass seed and fertilizer grows grass 2X faster than seed alone when applied at the new lawn rate* and grows in tough conditions*. Use a Scotts® spreader to apply per label directions. To apply to new lawns, rake the area to loosen soil and remove any dead grass or debris to ensure seed-to-soil contact. Rake the product into the soil to ensure it is covered just beneath the surface. For overseeding lawns, mow existing grass to approximately two inches in height or at the lowest mower setting then rake to loosen soil before application. For best results, water twice daily for three weeks or until seedlings reach 2 inches in height, and apply Scotts® Lawn Food products every 8 weeks through the season to maintain a thick, green lawn. One 4 lb. bag of Scotts® Turf Builder® Rapid Grass™ Bermudagrass covers up to 1,495 sq. ft. for new lawns or 5,000 sq. ft. when overseeding your lawn. *subject to proper care

How to Use

When Seeding a New Lawn

• One 4 lb. bag covers 1,495 sq. ft. of a new lawn.
• Rake the area you will be seeding to loosen the top layer of soil (roughly 2" deep). Remove any dead grass or debris to ensure seed-to-soil contact.
• Apply using a Scotts® spreader - Set a Scotts® Hand-Held Spreader to 4. Set a Scotts® Broadcast/Rotary Spreader to 3 3/4. Set a Scotts® Drop Spreader to 10 1/2. Set a Scotts® Wizz® Spreader to 4. Set a Scotts® Elite Spreader to 4.
• After applying, lightly rake the product into the soil. Ensure it is covered just beneath the soil surface.
• Water daily to keep the soil surface moist until the seedlings reach at least 2 in. tall.

When Overseeding an Existing Lawn

• One 4 lb. bag covers 5,000 sq. ft. when overseeding an existing lawn.
• Mow the area to a height of approximately 2 in. or mow at the lowest mower setting. Rake the area you will be seeding to loosen the top layer of soil. Remove any dead grass or debris to ensure seed-to-soil contact.
• Apply using a Scotts® spreader - Set a Scotts® Hand-Held Spreader to 2. Set a Scotts® Broadcast/Rotary Spreader to 2. Set a Scotts® Drop Spreader to 6 3/4. Set a Scotts® Wizz® Spreader to 3. Set a Scotts® Elite Spreader to 3.
• Water daily to keep the soil surface moist until the seedlings reach at least 2 in. tall.
• You can start to mow again when the lawn reaches the desired mowing height.

Where Not to Use

• Do not apply near water, storm drains or drainage ditches.

Where to Use

• Developed for use on lawns in the Southern United States.

When to Apply

• For use in the spring or fall when soil temperatures are consistently between 65°F and 80°F, or air temperatures are between 70°F and 90°F

Watering Tips

• For best results, water twice daily for at least 3 weeks.

Using with Other Products

• Please refer to package direction when applying Scotts Fertilizer products before or after seeding.

Store out of reach of children.

Apply this product only to your lawn. Sweep any product that lands on the driveway, sidewalk, or street back onto your lawn.

Start to mow when new grass reaches 2-3 inches in height.

You can start to enjoy a full, green lawn in 21-28 days as Scotts® Turf Builder® Rapid Grass™ Bermudagrass grows 2x faster than seed alone (when applied at the new lawn rate).

For best results, always use fresh products.