Get started on a lush, green lawn with the Scotts® Grass Seed and Fertilizer Bundle. Scotts® Grass Seed Drought Tolerant Mix combines Tall Fescue to grow long roots to access water deep in the soil, and Kentucky Bluegrass, which uses rhizomes to spread naturally to fill in bare spots. Follow-up your seed application with Scotts® Turf Builder® Triple Action Built for Seeding. This weed and feed is designed for new grass and can be applied immediately after seeding. In addition, it prevents crabgrass, dandelion, clover, ground ivy, chickweed, henbit, and nutsedge. To apply, first prep your lawn for seeding or overseeding as needed. Fill your Scotts® spreader with grass seed and set the dial to the recommended setting. After application, rake to ensure the seed is lightly covered with soil. Last, use your spreader to apply weed and feed (remember to change your spreader settings per label directions). One 4 lb. bag of Scotts® Grass Seed Drought Tolerant Mix has a new lawn coverage of 665 sq. ft. and an overseeding coverage of 2,000 sq. ft. One 4.3 lb. bag of Scotts® Turf Builder® Triple Action Built for Seeding covers 1,000 sq. ft.

How to Use

To Apply Grass Seed:

1. PREP: For a new lawn, rake area to loosen the top layer of soil (approximately 2 inches deep) and remove any dead grass or debris, ensuring seed-to-soil contact. To overseed, mow the lawn at the lowest setting and bag the clippings. Rake to remove debris, dead grass, and loosen the soil, ensuring seed-to-soil contact.
2. APPLY: Use a Scotts® Spreader to apply seed at the recommended spreader setting. New Lawn: Scotts® Broadcast/Rotary Spreader: 13; Scotts® Elite Spreader: 10; Scotts® Drop Spreader: 15 (Go over lawn 3X); Scotts® Wizz® Spreader: 6 1/2 (Go over lawn 2X); Scotts® Hand-held Spreader: 5 (Go over lawn 5X). Overseeding: Scotts® Broadcast/Rotary Spreader: 5 1/2; Scotts® Elite Spreader: 7; Scotts® Drop Spreader: 15; Scotts® Wizz® Spreader: 5 1/2; Scotts® Hand-held Spreader: 4 (Go over lawn 3X)
3. RAKE: Lightly rake the seed into the soil to ensure seed is covered just beneath the soil surface.

Follow your grass seed application with an application of Scotts® Turf Builder® Triple Action Built for Seeding:

1. Fill and set your spreader: Scotts® Broadcast/Rotary Spreader: 4 1/2; Scotts® Drop Spreader: 7; Scotts® Wizz® Spreader: 4 3/4
2. Walk at a steady pace.
3. Lightly water lawn to activate.

Where Not to Use

• Do not apply Scotts® Turf Builder® Triple Action Built for Seeding in a way that will contact any person or pet either directly or through drift. Do not apply another pesticide within seven days of an application of this product as turf injury may occur.

When to Apply

• For best results, apply grass seed in the Spring or Fall when daily average soil temperature are consistently between 60°F and 75°F, or air temperatures are between 65°F and 85°F.

Watering Tips

1. Water grass seed daily or as needed to keep the soil surface moist.
2. Continue this frequent watering pattern for at least 3 weeks or until seedlings reach 2 inches in height.
3. Use auto-timers or other reminders to help ensure no essential waterings are missed.

When using any lawn care product with grass seed, always check the label to make sure it's safe for seeding, and follow directions for best results. The great thing about a Scotts® grass seed bundle is that we've done the work for you - we paired a great grass seed product with our 3-in-1 weed control and fertilizer that's designed specifically for seeding.

We recommend starting with your grass seed application. You can apply Scotts® Turf Builder® Triple Action Built for Seeding immediately after you've applied seed.

Dandelion, crabgrass, clover, ground ivy, chickweed, henbit, nutsedge